high temperature resistant adh > welding ceramic lining high temperature resistant adhesive

welding ceramic lining high temperature resistant adhesive

BD400 welding ceramic lining abrasion wear high temperature resistant bonding epoxy adhesive

performance features:
1.With imported high performance heat resistant resin as main materials preparation.
2.Can cure at the normal temperature,can also heat for curing.
3.The highest temperature resistance is 350 degree,suggest working temperature is under 320 degree.
4.The curing has excellent water&acid resistance

product usage of our BD400 high temperature abrasion wear resistant welding ceramic liner epoxy bonding adhesives:
Used in the paste of wear resistant ceramic chip on the equipment of suffering from material erosive wear under
the high temperature working condition of electric power, metallurgy, cement, mining and other industries,
or welding the bottom lining and seal of ceramic,or used in the bonding and sealing between metal and metal,
metal and other inorganic materials under other high temperature working condition.

performance index:

product name	physical state	standard packaging	operation time limit (25℃)	usable time (25℃)	Range of application
BD400	Cement shape	5kg/group	1h	48 hours	Used in the paste of wear resistant ceramic tile on the equipment of suffering from material erosive wear under the high temperature working condition of electric power,metallurgy,cement, mining and other industries,especially suitable for welding the ceramic bottom lining and seal under the temperature of 350 degree working condition

item	color	density (g/cm3)	shear strength (Mpa) GB7124-2008	impact strength (J/cm2) GB6328-1999	tensile strength (Mpa) GB6329-2008	compressive strength (Mpa) GB1041-2008	working temperature （℃）
BD400	gray	1.43	2.5	27	76	76	-60-300

How to use:
1.Surface treatment: Grinding or sand blasting to clean up the dust,greasy dirt and rust on the surface of adherend,
clean it by cleaning agent in the end.

2.Configure adhesives: Make A and B two components mix uniformly according to the specified percentage(1000:15)

3.Using adhesives: Make the mixed-up adhesives spread coating on the surface of adherend uniformly.

4.Curing: Initial curing for 4-5 hours at the room temperature, fully curing for 2-5 days,or heat it up to the temperature of 80℃ and keep this temperature for 2 hours,then heat up to the temperature of
150 degree and keep this temperature for 2 hours for curing, if the time is urgent,can use hot air to cure,it can be fully
curing in half an hour at the temperature of 230 degree,if the product is not in a hurry to install,you had better place it for a period of time to  fully cure naturally.

Packaging specification:
Packed in a plastic drum, A component: 4.93Kg/drum, 4 drums/carton; B component:75g/bottle

transportation and storage:
Sealed storage in the cool and dry place. The warranty period is 1 year. Avoid placing it upside down,
knocking against and transporting it as a non-dangerous product during transportation.

Product packaging photo of BD400 anti wear abrasion high temperature resistant ceramic tile bonding epoxy adhesive:

------分隔线----------------------------